Contact Us

Self Adhesive PTFE PTFE Tape 0.13mm

Self Adhesive PTFE PTFE Tape, non-stick and abrasion resistant surface under high heat

Get A Quote

Detail of Self Adhesive PTFE PTFE Tape


Self Adhesive PTFE PTFE Tape in thickness of 0.11mm without release paper is our code MT7011AJ, normally in narrow width like 1/2", 3/4", 1-1/2", 2" to fit heating element of sealers, this PTFE tape withstand high temperature max to 500℉(260℃) and offers excellent quick release surface. Comparing with normal heat resistant rapes, our PTFE tape will not leave residual adhesive on the machine when peeling off for replacing new tape.


Self Adhesive PTFE PTFE Tape 0.13mm


The Advantage of Self Adhesive PTFE PTFE Tape


  • High temperature proof from -73-260 ℃(-100-500℉)

  • Smooth and slippery surface, quick release

  • Wear resistant surface with low friction

  • Electrical insulation

  • Resistant to almost all chemical and organic solvents

Structure of Self Adhesive PTFE PTFE Tape


Basic material

PTFE coated glass cloth in thickness of 0.13mm

Adhesive type

Pressure sensitive silicone adhesive in thickness of 0.05mm

Overall thickness

0.18mm


Self Adhesive PTFE PTFE Tape 0.13mm

How to apply PTFE tape on an Impulse heat sealer?


Self Adhesive PTFE Tape is used as a covering sheet on heat seal jaws to prevent plastic films from sticking to the band as well as cover the silicone elastomer on the opposing jaw. When you apply the tape, make sure the adhesive is  1/4"-1/2" past the machine on both ends to prevent heating element from direct contact with the sealer’s body. Set the sealer’s temperature range according to below instruction, put the poly bag on the heating area, press the sealer.


BAG Thickness (uM)

Recommended Heat Sealer Setting

35

1

50

2-3

75

2-3

100

2-3

150

3-4



The Application of Self Adhesive PTFE PTFE Tape

Self adhesive PTFE PTFE tape is used as a covering sheet on heat seal jaws to prevent plastic films from sticking to the sealer and also used to cover the silicone elastomer on the opposing jaw. When you install the PTFE adhesive tape, make sure them past the heating element on both ends to prevent heat element from direct contract with the sealer's body. Set the sealer's temperature range according to below instruction, put the poly bag on the heating area, press the sealer. Our 3mil is the most suitable type for heat sealing because it is thin and allow heat flow faster through the tape and into the plastic film.

1
Contact
Get in touch
with me
+86 153 0143 5378
Follow us
Contact Us:
Call Us :
+86-15301435378
No.2 Junmin Road, Urban Industry Park, Taixing 225400, Jiangsu