0.05mm Peel Ply release fabric, nonstick surface, quick heat transfer, not easy to wrinkle when pressing
Nonstick peel ply fabric is also called PTFE coated fiberglass, made by special fiberglass in thickness of 0.02mm, then coating PTFE on both sides to reach thickness to 0.04mm. The impregnating process of this peel ply fabric
High and low temperature proof
Smooth friction performance
High mechanical strength
Non stick surface, quick releasing
Good thermal insulation to 260℃/500℉
Flame retardant
Quick heat transfer
Light weight
Item Code | Material | Thickness | Max Width | Normal Length | Temperature resist |
MT9005AJ | PTFE, Fiberglass | 0.045mm | 1250mm | 30m, 33m, 50m, 100m | -73-260℃ |
Product | Basic Material | Coating Material |
PTFE FIBERGLASS | FIBERGLASS | PTFE |
FEATURES | METRIC | IMPERIAL |
Standard Width | 1000mm, 1250mm | 39inches, 49inches |
Thickness | 0.045mm | 0.0018inches |
Coated Weight | 48g/m2 | 4.13 oz/sq yd |
PTFE Content | 20% | 20% |
Temperature Resistance | -73-260℃ | -100-500℉ |
Polyethylene film products production, like CPE glove
0.05mm release fabric is designed for automatic high speed gloves sealing and cutting machine as release sheet, the fabric is very thin to provide quicker hot transfer and not easy to wrinkle when pressing. We also have 0.03mm release fabric available if you need thinner one.
Aerospace industry for curing
PTFE coated fabrics in thickness of 0.04mm can be made porous and used in aerospace industry, people in this industry call this fabric Peel Ply fabric, light content of PTFE increase permeability to allow excess resin, volatile and trapped air to escape into the breather during curing while maintain its quick release property
Electronic industry like CCL, FPCB laminating
With the coming of 5G wireless systems, 0.04mm PTFE coated fiberglass fabric become a new material to make PTFE CCL by laminating several layers fabric together, the material offers better dielectric property, and has obvious advantages in the high frequency circuit board.
